Table of Contents
Advertisement
en
Getting to know your appliance
Programmes
%
Time-setting
0
options
Rapid preheat-
]
ing/childproof
lock
Temperature/
~/1
weight
start
Start/stop
l
stop
--------
Display
The display is structured so that the information can be
read at a glance in any situation.
The value that you can currently set is highlighted. It is
highlighted by a red bar displayed under the set value.
The value that is highlighted can be changed directly
using the rotary selector.
Display elements
Here you can find a short explanation of the various
display elements.
Symbol
Timer
t
Cooking time
y
Clock
0
h:min
Hours/minutes
min:sec
Minutes/seconds Cooking time in minutes and seconds
Childproof lock
D
Drip tray
#
Water tank
$
Rapid heating
G
Descaling
Ê
--------
10
Call up the programme selection, use
the rotary selector to select the pro-
gramme number.
Select the "Time-setting options" sym-
bol and use the rotary selector to set
the time-setting options you require.
Press briefly: Activate/deactivate
rapid preheating.
Press and hold: Activate/deactivate
the childproof lock.
Select and set the temperature/
weight using the rotary selector.
Starts or pauses the operation
Note:
Pressing and holding ends the
current operation and the settings for
the operating mode selected are reset
to the default values.
Meaning
If the symbol is highlighted, the timer
will appear on the display.
If the symbol is highlighted, the cook-
ing time will appear on the display.
If the symbol is highlighted, the clock
will appear on the display.
Cooking time in hours and minutes
If this symbol lights up, the childproof
lock is activated.
Drip tray status display
Water tank status display
If this symbol lights up, rapid heating
is activated.
If the symbol lights up, the appliance
must be descaled.
Drip tray and water tank status display
The status display only lights up when the rip tray or
water tank is required for the selected operating mode.
It can display various statuses and informs the user
when action is required.
Water tank status display
Symbol
Symbol lights up,
arrow flashes
Symbol without
$
arrow flashes
Symbol without
arrow lights up
Drip tray status display
Symbol
Symbol lights up,
arrow flashes
Symbol without
arrow flashes
#
Symbol without
arrow lights up
Temperature indicator
The red bar at the bottom of the display shows that the
appliance is heating up.
If a heating function is in use, the bar turns red from left
to right as the cooking compartment heats up.
If you are using the grill or steam mode, the entire bar
lights up red immediately.
The bar does not light up when the microwave function
is in use.
When you are preheating the appliance, the optimal
time to place your food in the cooking compartment is
as soon as all five sections of the line have turned red.
Note:
Due to thermal inertia, the actual temperature
inside the cooking compartment may be slightly
different to the temperature that you set.
Night mode
To save energy, the display brightness is automatically
reduced to a lower level between 10 p.m. and
5.59 a.m.
Rotary selector
Use the rotary selector to change the adjustment values
that are shown in the display and highlighted.
In most selection lists, e.g. programmes, the first
selection follows the last.
For values, e.g. weight, you have to turn the rotary
Meaning
Water tank is in the tank recess and
needs filling.
Water tank is not in the tank recess
and needs fitting in place.
Water tank is in the tank recess. No
further action necessary.
Meaning
Drip tray is in the tank recess and
needs emptying.
Drip tray is not in the tank recess.
Insert the drip tray into the tank
recess.
Drip tray is in the tank recess. No fur-
ther action necessary.
Advertisement
Table of Contents
