Table of Contents
Advertisement
14. Tighten the screw that secures the lamp cover.
• Loose screw may cause a bad connection, which could
result in malfunction.
• Do not over tighten the screw.
15. Connect the power and restart the projector.
Resetting the lamp timer
16. After the startup logo, open the On-Screen Display (OSD) menu. Go to Advanced Menu -
Settings > Light Settings and press OK. The Light Settings page appears. Highlight Reset
Light Timer and press OK. A warning message is displayed asking if you want to reset the lamp
timer. Highlight Reset and press OK. The lamp time will be reset to "0".
Do not reset if the lamp is not new or replaced as this could cause damage.
13
14
Maintenance
39
Advertisement
Table of Contents
