Table of Contents
Advertisement
System
Language
Sets the language for the On-Screen Display (OSD) menus.
• Network: Allows you to make following settings:
Standby
Settings
• Audio Pass Through: The projector can play sound when it is in standby mode
•
Background
• Splash
Settings
• Menu Type: Switches to the Basic OSD menu.
Menu Settings
• Menu Display Time: Sets the length of time the OSD will remain active after
• Mute: Temporarily turns off the sound.
• Volume: Adjusts the sound level.
• Power On/Off Ring Tone: Turns on or off the ring tone when the projector is
Audio
Settings
The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound
mute or changing the sound level will not affect the Power On/Off Ring Tone.
• Closed Caption Enable: Activates the function by selecting On when the
Closed
Captions: An on-screen display of the dialogue, narration, and sound effects of TV programs and
Caption
videos that are closed captioned (usually marked as "CC" in TV listings).
• Caption Version: Selects a preferred closed captioning mode. To view captions,
Returns all settings to the factory preset values.
Factory
Default
The following settings will still remain: Keystone, Projector Installation, Light Usage Time,
High Altitude Mode, Security Settings, Baud Rate, HDMI Equalizer.
Enable Network
Standby Mode
Switch to Normal
Standby Mode
and the corresponding jacks are correctly connected to devices. Press
choose the source that you wish to use. See
make the connection.
Background:
Sets the background color for the projector.
Screen:
Allows you to select which logo screen will be displayed during
projector start-up.
your last key press.
in startup and shutdown process.
selected input signal carries closed captions.
select CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary language
in your area).
Allows the projector to provide the network function in
standby mode.
Allows the projector to disable the network function
after a set period of time after it enters standby mode.
For instance, if 20 min is selected, the projector is able to
provide the network function for 20 minutes after it
enters standby mode. When 20 minutes is up, the
projector enters normal standby mode.
Connection on page 17
Menu operation
/
to
for how to
33
Advertisement
Table of Contents
