Table of Contents
Advertisement
To obtain the lamp hour information:
1. Go to Advanced Menu - Settings > Light Settings and press OK. The Light Settings page
appears.
2. Press
to select Light Usage Time and press OK. The Light Usage Time information is
displayed.
You can also get the lamp hour information on the Information menu.
Extending lamp life
• Setting the Light Mode
Go to Advanced Menu - Settings > Light Settings > Light Mode and select a suitable lamp
power from among the provided modes.
Setting the projector in Economic, SmartEco or LampSave mode extends lamp life.
Lamp mode
Description
Normal
Provides full lamp brightness
Economic
Lowers brightness to extend the lamp life and decreases the fan noise
Adjusts the lamp power automatically depending on the content brightness level while
SmartEco
optimizing display quality
Adjusts the lamp power automatically depending on the content brightness level while
LampSave
offering a longer lamp life
• Setting Auto Power Off
This function allows the projector to turn off automatically if no input signal is detected after a set
period of time to prevent unnecessary waste of lamp life.
To set Auto Power Off, go to Advanced Menu - Settings > Operation Settings > Power
On/Off Settings > Auto Power Off and press
Timing of replacing the lamp
When the Lamp indicator lights up or a message appears suggesting it is time to replace the lamp,
please consult your dealer or go to
may cause a malfunction in the projector and in some instances the lamp may explode.
• The apparent brightness of the projected image will vary depending on the ambient lighting conditions, selected
input signal contrast/brightness settings, and is directly proportional to projection distance.
• The lamp brightness will decline over time and may vary within the lamp manufacturers specifications. This is
normal and expected behavior.
• The LAMP indicator light and TEMPerature warning light will light up if the lamp becomes too hot. Turn
the power off and let the projector cool for 45 minutes. If the Lamp or Temp indicator still lights up after turning
the power back on, please contact your dealer. See
The following Lamp warning displays will remind you to change the lamp.
Notice
Order a replacement lamp
Equivalent lamp hour >XXXX hours
Order a new lamp at www.BenQ.com
36
Maintenance
/ .
http://www.BenQ.com
Indicators on page
Install a new lamp for optimal performance. Press
dismiss the message.
before installing a new lamp. An old lamp
40.
OK
to
Advertisement
Table of Contents
