BenQ MX707 User Manual page 10

8. SOURCE
Displays the source selection bar.
9. Source selection button: PC 1
Selects PC 1 input source for display.
10. Source selection button: HDMI
Press this button repeatedly to select HDMI
1or HDMI 2 input source for display.
11. ECO BLANK
Used to hide the screen picture.
Do not block the projection lens from
projecting as this could cause the blocking
object to become heated and deformed or
even cause a fire.
12. PAGE /PAGE
Operate your display software program (on a
connected PC) which responds to page
up/down commands (like Microsoft
PowerPoint).
Controlling your smart device with the remote control
When the projector projects the content
from your MHL compatible smart device,
you can use the remote control to
control your smart device.
To enter the MHL mode, press and hold
AUTO for 3 seconds. The following
buttons are available for controlling your
smart device: Arrow keys ( ,
), MENU, BACK, OK.
To leave the MHL mode, press and hold
AUTO for 3 seconds.
When the projector is under MHL mode, the keypad on the projector should be with the same definition of the keys
on the remote control.
10 Introduction
13. SMART ECO
14. FREEZE
15. ASPECT
16. Volume keys
17. ZOOM+/ZOOM-
18. QUICK INSTALL
19.
, ,
Displays the Light Mode menu for selecting a
suitable lamp operating mode.
Freezes the projected image.
Selects the display aspect ratio.
/
Decreases or increase the projector volume.
Magnifies or reduces the projected picture
size.
Quickly selects several functions to adjust the
projected image and displays the test pattern.
Toggles projector audio between on and off.