Table of Contents
Advertisement
Magnifies or reduces the projected image.
1. After the Zoom bar displays, press
2. To navigate the picture, press OK to switch to the panning mode and press the
Digital Zoom
3. To reduce size of the picture, press OK to switch back to the zoom in/out
The picture can only be navigated after it is magnified. You can further magnify the picture while
searching for details.
Shrinks and/or shifts the projected image.
1. After the adjustment bar displays, press
2. Press OK to activate digital shift function.
Digital Shrink
3. After digital shift function is activated, press the directional arrows ( ,
& Shift
4. Press AUTO to restore the picture to its original size.
The picture can only be shifted after it shrank.
Returns all of the adjustments you've made for the Display menu to the factory
Reset Display
preset values.
Network
See
Wired LAN
BenQ product webpage.
AMX Device
When this function is On, the projector can be detected by AMX controller.
Discovery
MAC Address
Displays the mac address for this projector.
(Wired)
Settings
Projector
See
Installation
Auto Source
Allows the projector to automatically search for a signal.
Search
• On: Allows the projector to automatically determines the best picture timings for
Auto Signal
Adjustment
• Off: The projector will not respond when AUTO is pressed.
30
Menu operation
desired size.
directional arrows ( ,
navigate the picture.
function, and press AUTO to restore the picture to its original size. You can
also press repeatedly until it is restored to the original size.
the picture to a desired size.
) to shift the image.
BenQ Network Projector Operation
Choosing a location on page
the displayed image when PC signal (analog RGB) is selected and AUTO is
pressed.
repeatedly to magnify the picture to a
,
,
) on the projector or remote control to
/
Guide, which can be downloaded from
12.
repeatedly to shrink or magnify
,
,
Advertisement
Table of Contents
