Table of Contents
Advertisement
Model 8335 (TC/SYNC card) Owner's Manual
Changes in D-15 functions and new SETUP menu items
There will be some changes in the displays and key functions by installing
the 8335 in the D-15 Furthermore, SETUP mode menu items heretofore not
effective will now be effective.
The content of these changes and now effective functions only will be
explained here. Therefore, in regards to other functions, please refer to the
D-15 Owners Manual.
Content of changes
1. TC on tape will be shown in the FL display!
2. External time code (LTC) input will be displayed as the Reference (REF
TC)!
Due to these changes in above 1. and 2., the display content will be different
as a result of the D-15 DISP TIME key operation.
[Display switching by the DISP TIME key without 8335]
A-time
[Display switching by the DISP TIME key with 8335]
A-time
TC (*1) or A-Time TC (*2)
(*1) TC
Displays IEC time code figures recorded on tape.
(*2) A-time TC Displays the resulting time code figures when A-time recorded on the
tape is converted to time codes.
(*3) REF TC
Taking the externally input time code as a Reference, it is displayed as
follows:
<Example>: When indicating 1h:34m:28s:15f, frame rate = 24
H
Other frame rate figures will be displayed as shown below:
Type of TC
24 (FILM)
25 (EBU)
30 or 29.97 drop frame (SMPTE)
30 or 29.97 nondrop frame (SMPTE)
DATE
S
F
M
8
DATE
REF TC (*3)
Display
24
25
30D or 29D
30N or 29N
Advertisement
Table of Contents
