Connecting Your Monitor - Iiyama ProLite XB2779QQS-S1 User Manual

CONNECTING YOUR MONITOR

Ensure that both the computer and the monitor are switched off .
Connect the computer to the monitor with the signal cable.
Connect the Power Cable to the monitor fi rst and then to the power supply.
Turn on your monitor and computer.
NOTE
 The signal cables used for connecting the computer and monitor may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regional iiyama offi ce.
 For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyama offi ce for a suitable adaptor.
 Make sure you tighten the fi nger screws at each end of the signal cable.
 The Class I pluggable equipment Type A must be connected to protective earth.
 The socket-outlet shall be installed near the equipment and shall be easily accessible.
 Excessive sound pressure from ear-/headphones can cause hearing damage/hearing loss.
[Example of Connection]
Power Cable
(Accessory)
AV Equipment
HDMI Cable (Not Included)
[ Collect Cables ]
Put the cables through the cable hole.
Collect cables at the back of the stand.
8 BEFORE YOU OPERATE THE MONITOR
<Back>
HDMI Cable
(Not Included)
GAME
Equipment etc.
HDMI Cable
(Accessory)
DisplayPort Cable
(Accessory)
Computer
DisplayPort Cable
(Not Included)
Computer