Your Air Purifier; Product Overview (Fig. A); Controls Overview (Fig. B); Getting Started - Philips AC2889/90 User Manual

2 Your air purifier

Congratulations on your purchase, and
welcome to Philips!
To fully benefit from the support that
Philips offers, register your product at
www.philips.com/welcome.

Product overview (fig. a)

A Air outlet
B Control panel
C Air quality light
D Air quality sensors
NanoProtect filter HEPA Series 3
E
(FY2422)
NanoProtect filter Active Carbon
F
(FY2420)
G Pre-filter
H H1, H2 and H3 air inlets
I
Front panel

Controls overview (fig. b)

J On/Off button
K Light dimming button
L Auto mode button
M Display screen
N
Pollution mode icon
O Allergen mode icon
P Bacteria & Virus mode icon
Q
Fan speed button
R Timer button
S Reset button

3 Getting started

Installing the filters

Note
• Make sure the air purifier is
unplugged from the electrical outlet
before installing the filters.
• Make sure the side of the filter with
the tag is pointing towards you.
1
Pull the bottom part of the front
panel to remove it from the air
purifier (fig. c).
2
Press the two clips down (1) and pull
the pre-filter towards you (2)
(fig. d).
3
Remove all filters (fig. e).
4
Remove all packaging materials
from the filters (fig. f).
5
Place the thick filter (FY2422) into
the air purifier and then the thin AC
filter (FY2420) (fig. g). The model
numbers are shown on each filter.
6
Attach the pre-filter back into the
air purifier (fig. h).
Note
• Make sure the side with the two
clips is pointing towards you, and
that all hooks of the pre-filter are
properly attached to the purifier.
7
Reattach the front panel by pressing
the top part of the panel onto the
top of the air purifier (1). Then, gently
push the panel against the body of
the air purifier (2) (fig. i).
8
Wash your hands thoroughly after
installing filters.
EN 5