Table of Contents
Advertisement
NEED HELP?
Call our ventilation experts toll free al 800-966-8300
AVEZ-VOUS BESOIN D'AIDE ?
Contactez nos experts au numéro gratuit 800-966-8300
¿NECESITA AYUDA?
Póngase en contacto con nuestros expertos a través del número gratis 800-966-8300
RANGE HOOD - User instructions
USA
HOTTE DE CUISINE - Notice d'utilisation
F
CAMPANA EXTRACTORA - Manual de utilización
E
XOC24SMUA
XOC30SMUA
XOC36S
XOC30S
Advertisement
Table of Contents
Related Manuals for Xo XOC24SMUA
Summary of Contents for Xo XOC24SMUA
- Page 1 XOC24SMUA XOC30SMUA XOC36S XOC30S NEED HELP? Call our ventilation experts toll free al 800-966-8300 AVEZ-VOUS BESOIN D’AIDE ? Contactez nos experts au numéro gratuit 800-966-8300 ¿NECESITA AYUDA? Póngase en contacto con nuestros expertos a través del número gratis 800-966-8300 RANGE HOOD - User instructions HOTTE DE CUISINE - Notice d’utilisation...
- Page 2 The warranty is extended to the original purchaser for products purchased for ordinary home use in North America. Should you require service for your XO product call a product service specialist at 800.966.8300 What is not covered Improper Installation.
-
Page 3: Important Safety Instructions
ENGLISH IMPORTANT SAFETY INSTRUCTIONS FOR RESIDENTIAL USE ONLY READ AND SAVE THESE INSTRUCTIONS PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING. IMPORTANT: Save these Instructions for the Local Electrical Inspectors use. INSTALLER: Please leave these Instructions with this unit for the owner. OWNER: Please retain these instructions for future reference. -
Page 4: Installation Instructions
Crepes Suzette, Cherries Jubilee, Peppercorn Beef Flambè ). C. Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filter. D. Use proper pan size. Always use cookware appropriate for the size of the surface element. E. - Page 5 E. This unit must be grounded. WARNING - TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK. WARNING - UNDER CERTAIN CIRCUMSTANCES DOMESTIC APPLIANCES MAY BE DAN- GEROUS. A. Do not check filters with hood working. B. Do not touch the lamps after a prolonged use of the appliance. C.
-
Page 6: Duct Fittings
DUCT FITTINGS: Equivalent Total Duct Quantity This Hood Must Use an Dimensions: Number Equivalent Piece: Used: Length*: Length: 6" Round Duct. It Can Transition to 3-1/4" x Round, straight 1 ft. (per foot 10" or 3-1/4" x 12" Duct. lenhgth) 3-1/4"... -
Page 7: Install The Ductwork
WARNING FIRE HAZARD NEVER exhaust air or terminate duct work into spaces between walls, crawl spaces, ceiling, attics or garages. All exhaust must be ducted to the outside, unless using the recirculating option. Use single wall rigid Metal ductwork only. Fasten all connections with sheet metal screws and tape all joints w/ certified Silver Tape or Duct Tape. - Page 8 PRODUCT DIMENSIONS AND CLEARANCE XOC24SMUA - XOC30SMUA - XOC36S - XOC30S: › Front of hood › Side of hood 11-1/16" 18-5/8" (24" - 30") 30-7/16" (36") 1-3/16" 16-15/16" 23-9/16" (24") - 29-15/16" (30") - 35-3/8" (36") min 0 - 0/16" - max 1 - 4/16"...
- Page 9 INSTALLATION INSTRUCTIONS INSTALLATION - VENTED TO THE OUTSIDE Before proceeding with installation opera- tions, remove the anti-grease filters (Fig.3) in order to make handling the device easier. This product can be installed in 3 different ways, depending on the model and on your requirements: 1- installation of the hood on the lower part of the wall unit.
- Page 10 24" - 36" - 30" Min 0-1/2" Max 1/016" Fig.4 1. FIXING THE HOOD TO THE LOWER PART OF THE WALL CABINET: Follow the steps below: 1- Position template B on the wall unit, bearing in mind the measurements indicated in fig.
- Page 11 firmly reaches the wall unit (figure 4 - step 3.2). After any adjusting, tighten the bracket to the body (figure 4 - step 3.3). - Fasten screw D to the wall unit as indicated in figure 4 - step 4. - Once you have fastened the hood to the wall unit, adjust the spacer L, with the screws P, to make the device line up with the rear wall unit (figure 4 - step 5).
- Page 12 2. INSTALLATION OF THE HOOD ON THE LOWER PART OF THE WALL UNIT ON THE DIVIDING PANEL. Follow the steps below: 1 -Check the measurements indicated in fig.1-2 and the minimum distance from the hob, before installing the hood on the dividing panel. 3- Make sure the thickness of the wall unit is within the parameters indicated in figure 4 - step 2.
- Page 13 24" - 36" 1-15/16" (24"-36") 19-11/16" (24") 31-1/2" (36") 1-11/16" 3-13/16" 30" Ø 6" 7-11/16" 19-11/16" (30") 5-1/8" (30") 1-11/16" 1-11/16" 3-13/16" Ø 6" 7-11/16" 1-11/16" Fig.5 - 13 -...
- Page 14 30" Fig.6 - 14 -...
- Page 15 30" 3. INSTALLATION OF THE HOOD ON THE LOWER PART OF THE WALL UNIT ONLY FOR 30". This model includes side installation to the wall unit by using 2 brackets B (figure 6 besides steps 3-4, indicated in figure 4). 1- Position template B on the wall unit, bearing in mind the measurements indicated in fig.
- Page 16 - Once you have fastened the hood to the wall unit, adjust the spacer L, with screws P, to make the device line up the rear wall unit (figure 4 - step 5). IMPORTANT - The range hood must be secured to wall studs or use drywall anchors capable of supporting 75 lbs.
-
Page 17: Power Supply
POWER SUPPLY: IMPORTANT – (Please read carefully) WARNING: FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED. Remove house fuse or open circuit breaker before beginning installation. Do not use an extension cord or adapter plug with this appliance. Follow National electrical codes or prevailing local codes and ordinances. -
Page 18: Connect Electrical
2. CONNECT ELECTRICAL: • Power Supply Connection: For connection to the power supply refer to the follows Fig.7: BLACK = L line WHITE = N neutral GREEN/YELLOW = G ground - A double-pole switch properly rated must be installed to provide the range hood power supply disconnection. - Page 19 DUCTLESS RECIRCULATING OPTION: CARBON FILTER KIT XOC24SMUA - XOC30SMUA - XOC36S - XOC30S : follow the indi- cations described in the additional sheet to install the kit. - 19 -...
- Page 20 7-9/16" - 20 -...
- Page 21 - 21 -...
- Page 22 • If the apparatus is equipped with the following controls luminous: A = LIGHT B = OFF C = SPEED I D = SPEED II E = SPEED III F = AUTOMATIC STOP TIMER - 15 minutes (*) • The appliance has the INTENSIVE speed function, press key E for two seconds and it will be activated for 10 minutes after which it will return to the previously set speed.
-
Page 23: Maintenance
MAINTENANCE • We recommend that the cooker hood is switched on before any food is cooked. We also recommend that the appliance is left running for 15 minutes after the food is cooked, in order to thoroughly eliminate all contaminated air. The effective perfor- mance of the cooker hood depends on constant maintenance;... - Page 24 - DO NOT use ordinary steel wool or steel brushes. Small bits of steel may adhere to the surface causing rust. - DO NOT allow salt solutions, disinfectants, bleaches, or cleaning compounds to remain in contact with stainless steel for extended periods. Many of these compounds contain chemicals with may be harmful.
- Page 25 • Replacing halogen light bulbs: To replace the dichroic lamps, rotate the lamp anticlockwise by means of a suction cup as shown in figure. Replace the bulbs with new ones of the same type. - 25 -...
- Page 26 XOC24SMUA - XOC30SMUA - XOC36S - XOC30S - 26 -...
-
Page 27: Options And Accessories
OPTIONS AND ACCESSORIES: Model XORFRND Ductless Recirculating Filter Kit. Model XORFK12 Ductless Recirculating Filter Kit. - 27 -... -
Page 28: Installation Preparation
INSTALLATION PREPARATION: Check installation hardware: Locate the hardware package packed with the hood and check contents. TYPE DESCRIPTION N° 1/4" 1/8" x 1/4" 6/16" 3/16" x 9/16" Adjusting brackets Aluminum filter Supply of side fixing brackets on wall unit only for 30" 1/4"... - Page 29 XOC Spec Sheet Model: XOC24SMUA - XOC30SMUA - XOC36S - XOC30S Sizes: 24" - 30" - 36" Depth: 11-1/16" Features and Benefits: Model: XOC24SMUA - XOC30SMUA - 395 CFM high velocity blower optimally removes Smoke, Grease and Odors. - 3 speed electronic illuminated controls.