Table of Contents
Advertisement
2
Turn on the TV and switch to the correct
video-in channel in one of the following
ways:
• Go to the lowest channel on your TV,
and then press the Channel Down
button until you see the blue screen.
• Press the source button repeatedly on
the remote control of your TV.
Tip
•
The video-in channel is between the lowest and highest
channels and may be called FRONT, A/V IN, VIDEO etc.
See the TV user manual on how to select the correct
input on the TV.
Select the correct TV system
Change this setting if the video does not appear
correctly. By default, this setting matches the
most common setting for TVs in your country.
1
Press SYSTEM/MENU.
2
Select [Video Setup].
3
Select [TV System], and then
4
Select a setting and then press OK.
• [NTSC] - For TV with NTSC color
system.
• [PAL] - For TV with PAL color system.
• [Multi] - For TV that is compatible with
both PAL and NTSC.
5
To return to the previous menu, press
RETURN/TITLE.
6
To exit the menu, press SYSTEM/MENU.
Change system menu
language
1
Press SYSTEM/MENU.
2
Select [General Setup].
3
Select [OSD language], and then press
4
Select a setting and then press OK.
EN
12
5
To exit the menu, press SYSTEM/MENU.
Turn on Progressive Scan
Progressive scan displays twice the number of
frames per seconds than interlaced scanning
(ordinary TV system). With nearly double the
number of lines, progressive scan offers higher
picture resolution and quality.
Before you turn on this feature, ensure that:
•
The TV supports progressive scan signals.
•
You have connected the unit with the TV
through component video.
1
Turn on the TV.
2
Ensure that the TV progressive scan mode
is deactivated (see the TV user manual).
3
Switch the TV to the correct viewing
channel for this unit.
4
Press DISC.
5
Press SYSTEM/MENU.
6
Press
menu, and then press
7
Select [P-Scan], and then press OK.
.
» The progressive setup is complete.
.
to select [Video Setup] in the
/
.
Advertisement
Table of Contents
