a
b
Note
If you are not going to use the remote control for a
long time, remove the batteries.
Do not use old and new or different types of batteries
in combination.
Batteries contain chemical substances, so they should
be disposed of properly.
Turn on
Press .
» The display panel displays [LOAD] ORDG
To switch to standby mode, press
Find correct viewing channel
1
Turn on the unit.
2
Press DISC/USB to switch to disc mode.
3
Turn on the TV and switch to the correct
video-in channel.
12
EN
c
again.
Tip
The video-in channel is between the lowest and highest
channels and may be called FRONT, A/V IN, VIDEO etc.
See the TV user manual on how to select the correct
input on the TV.
Select the correct TV system
Change this setting if the video does not appear
correctly. By default, this setting matches the
most common setting for TVs in your country.
1
Press
to access the home menu.
2
Select [Setup]>[Video] > [TV SYSTEM],
and then press
.
3
Press
/
to Select a setting and then
press OK.
[PAL] - For TV with PAL color system.
[Multi] - For TV that is compatible with
both PAL and NTSC.
[NTSC] - For TV with NTSC color
system.
4
To exit the menu, press
Change system menu
language
1
Press .
2
Select [Setup]>[General]>[OSD
Language].
3
Press
to enter the language list.
4
Press
/
to select a language, and then
press OK.
5
Press
BACK to exit the menu.
BACK.