Table of Contents
Advertisement
Find the correct viewing
channel
1
Press
to turn on the unit.
2
Press DISC to switch to disc mode.
3
Turn on the TV and switch to the correct
video-in channel in one of the following
ways:
•
Go to the lowest channel on your TV,
then press the Channel Down button
until you see the blue screen.
•
Press the source button repeatedly on
the remote control of your TV.
Tip
•
The video-in channel is between the lowest and highest
channels and may be called FRONT, A/V IN, VIDEO etc.
See the TV user manual on how to select the correct
input on the TV.
Select the correct TV system
Change this setting if the video is not displayed
correctly. By default, this setting matches the
most common setting for TVs in your country.
1
Press .
2
Select
[Setup] ->[Video] -> [TV
System].
3
Select a setting and press OK.
•
[PAL]- For TV with PAL color system.
[Multi]- For TV that is compatible with
•
both PAL and NTSC.
•
[NTSC]- For TV with NTSC color
system.
4
To return to the previous menu, press
5
To exit the menu, press .
Change system menu
language
1
Press .
2
[Setup] -> [General] -> [OSD
Select
Language], and press OK.
3
Select a setting and then press OK.
4
To exit the menu, press .
.
EN
15
Advertisement
Table of Contents
