Table of Contents
Advertisement
Note
•
If you forget the password, enter '123456' before you
set a new password.
[Version Info]
Display the software version of this device.
[Default]
Reset all the settings to factory default, except
for the password and parental settings.
10 Other features
Activate demonstration mode
You can see an overview of all features.
In the standby mode with clock display (if
set), press
on the main unit to activate the
demonstration mode.
» A demonstration of major available
features starts.
To deactivate the demonstration mode:
Press
on the main unit again.
Set alarm timer
This unit can be used as an alarm clock. You can
select DISC, FM, iPod/iPhone/iPad, or USB as
alarm source.
Note
•
Ensure that you have set the clock correctly.
1
In standby mode, press and hold TIMER/
SLEEP until [SET TIMER] (set timer) scrolls
on the display.
2
Press a source key to select a source:
DISC, FM, iPod/iPhone/iPad, or USB.
3
Press TIMER/SLEEP to confirm.
» The hour digits are displayed and begin
to blink.
4
Press
/
repeatedly to set hour, and
then press TIMER/SLEEP again.
» The minute digits are displayed and
begin to blink.
5
Press
/
to set minute, and then press
TIMER/SLEEP to confirm.
6
Press VOL +/- to adjust volume, and then
press TIMER/SLEEP to confirm.
EN
21
Advertisement
Table of Contents
