Table of Contents
Advertisement
2 Once successfully connected, the measurement
results are being transmitted to the health app
and the Bluetooth symbol lights up.
- If the data transmission is successful, the
measurement results are displayed in
the health app.
- If the data transmission fails, the Bluetooth
symbol together with 'Err' is shown. The
pending measurement data will be transmitted
to your mobile device the next time it connects
with your blood pressure monitor. You can also
try to resend the data:
-
Activate the health app on your mobile
device.
-
Press the user ID button or 'on' button to
switch on the blood pressure monitor.
-
The measurement results will be
automatically sent to your mobile device if a
user profile has been connected.
-
When the blood pressure monitor connects
via Bluetooth to the app of a user, the
device will automatically select that user and
measurements can only be done for that
user.
Cleaning and storage
Caution: This device is not washable. Never
immerse the device in water and do not rinse it
under running water.
Caution: Avoid violent movements and hard
contacts with objects.
1
Switch off the device and unplug the adapter
from the wall socket.
2 Use a slightly damp or dry cloth to wipe the
surface of the display (Fig. 17).
3 Store the device in a cool, dry, and ventilated
environment.. For further information please
refer to the transport and storage specifications
detailed in this manual.
Ordering accessories
To buy accessories or spare parts, visit
www.shop.philips.com/service or go to your
Philips dealer. You can also contact the Philips
Consumer Care Center in your country (see the
international warranty leaflet for contact details).
Recycling
- This symbol means that this product shall not
be disposed of with normal household waste
(2012/19/EU) (Fig. 18).
- This symbol means that this product contains a
built-in rechargeable battery which shall not be
disposed of with normal household waste (Fig.
19) (2006/66/EC). We strongly advise you to
take your product to an official collection point
or a Philips service center to have a
professional remove the rechargeable battery.
- Follow your country's rules for the separate
collection of electrical and electronic products
and rechargeable batteries. Correct disposal
helps prevent negative consequences for the
environment and human health.
Removing the rechargeable battery
Warning: This procedure is irreversible. You
cannot use the device anymore after this
procedure.
Note: We strongly advise you to take your product
to an official collection point or a Philips service
centre to have a professional remove the battery.
Caution: Observe basic safety precautions when
you follow the procedure described below. Be
sure to protect your eyes, hands, fingers, and the
surface on which you work.
1
Make sure the rechargeable battery is empty.
2 Open the device.
3 Remove the battery with appropriate tools.
Warranty and support
If you need information or support, please visit
www.philips.com/support or read the
international warranty leaflet.
Recalibration can be carried out by an appropriate
authority or authorized service center. This
calibration will be charged for by said authority.
If you need more information about the app,
please visit www.philips.com/healthprograms
Troubleshooting
This chapter summarizes the most common
problems you could encounter with the device. If
you are unable to solve the problem with the
information below, visit www.philips.com/support
for a list of frequently asked questions or contact
the Consumer Care Center in your country.
Troubleshooting
Problem
My blood
pressure
fluctuates
throughout
the day.
Possible
cause
Your
measurement
position, the
conditions
under which
you measure
or the time of
measureme
nt, are
different
during each
measureme
nt.
Solution
For a meaningful
comparison, try to
measure under
similar conditions.
For example, take
daily
measurements at
approximately the
same time, on the
same arm, or as
directed by a
doctor.
Advertisement
Table of Contents
