Download Print this page

Philips Lumea SC1997 Manual page 14

Hide thumbs Also See for Lumea SC1997:

Advertisement

Available languages
  • EN

Available languages

14
English
What to expect
Immediately after the 1st treatment
After 2-3 treatments
After 4-5 treatments
Tanning advice
Tanning with natural or artificial sunlight
Tanning with creams
After the first treatment, it can take 1 to 2 weeks for the hairs to fall out. In the
first weeks following the initial treatments, you still see some hairs
growing. These are likely to be hairs that were not in their growing phase
during the first treatments.
After 2-3 treatments, you should see a noticeable reduction in hair growth.
However, to effectively treat all hairs, it is important to keep on treating
according to the recommended treatment schedule.
After 4-5 treatments, you should see a significant reduction of hair growth in
the areas that you treated with Lumea. A reduction of hair density should be
visible as well. Keep on treating with frequent touch-ups (every 4-8
weeks) to maintain the result.
Intentionally exposing your skin to natural or artificial sunlight with the aim
of developing a tan influences the sensitivity and color of your skin.
Therefore the following is important:
- After each treatment, wait at least 48 hours before tanning. Even after 48
hours, make sure that the treated skin does not show any redness from
the treatment anymore.
- In case of exposing your skin to the sun (without tanning intentionally) in
the 48 hours after treatment, use a sunblock SPF 50+ on the treated
areas. After this period, you can use a sunblock SPF 30+ for two weeks.
- After tanning, wait at least 2 weeks before you use Lumea. Perform a skin
test to determine the appropriate light intensity setting.
- Do not use Lumea on sunburned body areas.
Note: Occasional and indirect sun exposure does not qualify as tanning.
If you have used an artificial tanning lotion, wait until the artificial tan has
disappeared completely before you use the device.

Advertisement

loading

This manual is also suitable for:

Lumea sc1999Lumea sc1999/80Lumea sc1999/70