LG multi V ARUB160BT3 Instruction Manual page 103

Table of Contents

Integrated Test Running Function_Cooling Mode (Setting 3)

This function is checking process for normal operation of parts and system On operating system.

• All processes carry out included refrigerant amount judge logic and check normal condition of parts on cooling mode.

• This function check only normal condition of parts on heating mode.

• Saved data can check using LGMV.

Refrigerant amount judge

during all IDU operation

data on Test Runing(15min)

1 IDU operation

1 IDU operation data

(10min)

Warning : Please reset SUB PCB before starting this function

Note

1. Judge the normal condition refer to report of Test Running.

Start

Press the black button for 2 sec

All IDU operation on

Cooling mode

Temp. Condition

Yes

Thermo off

IDU judge

Yes

Note 1

DIP Switch Settings

Error Display

Press the black button for 2 sec

End

Press the black button for 2 sec.

after turning off all of Dip switch.

Completed

Test Run

Installation Manual 103

Table of Contents

Multi v arub series Multi v arub120bt3 Multi v arub180bt3