Event ID code
089A
089B
089C
089D
0920
Parent topic:
Projector Reset Options - Reset Menu
You can reset most of the projector settings to their default values using the Reset All Config option on
the Reset menu.
You can also reset the saved names and settings in the Save Memory list using the Reset All Memories
option.
To reset all settings to the factory default (except for password protected settings), select the Reset All
(Factory Default) option. You need to enter a password to reset the settings. The default password is
0000, which you should change to your own password.
You cannot reset the following settings using the Reset All Config option:
• Input Signal
• Memory
Cause and solution
EAP authentication error. Make sure the wireless network security settings are
correct.
The internal power supply is running low. Contact Epson support.
Projector Information Display - Info Menu
231