Table of Contents
Advertisement
Note: If the adjustment triangle turns gray, you cannot adjust the shape any further in that direction.
8. Press the Esc button to return to the Curved Surface menu screen.
9. Repeat the previous three steps as necessary to adjust other image areas.
If the image expands or contracts, continue with the next steps to adjust the linearity.
Note: To reset your adjustments, press and hold the Esc button for at least 2 seconds to display a
reset screen. Then select Yes and press Enter.
10. Press the Esc button.
You see this screen:
11. To compensate for expansion or contraction while maintaining the image aspect ratio, select
Maintain Aspect Ratio and set it to On.
12. Select one of the following to adjust the linearity:
• Horizontal Linearity: Adjusts horizontal expansion or contraction.
• Vertical Linearity: Adjusts vertical expansion or contraction.
13. Use the arrow buttons to select a displayed line to use as a baseline and press Enter.
The selected baseline flashes orange and white.
116
Advertisement
Table of Contents
