Table of Contents
Advertisement
Setting
Shutter Settings
Video Terminal Settings
Advanced
Date & Time
Lens Calibration
Advanced settings
Setting
Beep
Indicators
Log Save Destination
Batch Setup Range
Description
Adjusts the shutter settings
Fade-in: sets the number of seconds for a fade-in transition
effect when displaying an image
Fade-out: sets the number of seconds for a fade-out transition
effect when hiding an image
Shutter Timer: turns off the projector automatically after using
the shutter and 2 hours of inactivity has passed
Shutter Release: select Shutter if you want to use only the
Shutter button to turn off the shutter, or select Any Button to
use any button to turn it off
Startup: select the shutter status for when you turn on the
projector
Standby: select the shutter status for when the projector is in
standby mode or select Last Used to maintain the current
shutter status when you turn off the projector
Enables or disables each video input port
See the next table in this topic
Adjusts the projector's time and date settings
Displays information about the lens currently in use and lets
you start lens calibration
Description
Controls the beep that sounds when you turn the projector on
or off
Select Off to turn off projector lights, except warning lights
Select where you want to save projector operation log files
Select which projector menu settings to copy using the batch
setup feature; select All or select Limited to not copy the EDID
settings or all Network menu settings (except the Notifications
and Others menu settings)
223
Advertisement
Table of Contents
