Table of Contents
Advertisement
Setting
Menu Position
Message Position
Messages
Display Background
Startup Screen
Standby Confirmation
Air Filter Notice
Screen
Panel Alignment
Color Uniformity
OSD Rotation
Operation settings
Setting
Direct Power On
Sleep Mode
Sleep Mode Timer
High Altitude Mode
Startup Source Search
Description
Selects the position of the projector menu displayed on the
screen
Selects the position of messages displayed on the screen
Controls whether messages are displayed on the screen
Selects the screen color or logo to display when no signal is
received
Controls whether a special screen appears when the projector
starts up
Displays a confirmation message after pressing the Standby
button on the remote control
Displays a message when a clog in the air filter is detected
Sets the aspect ratio and position of the projected image
according to the type of screen being used
Corrects color misalignment in the projected image
Adjusts the color tone balance
Rotates the menu display 90°
Description
Turns on the projector when you plug it in
Automatically places the projector in standby mode after an
interval of inactivity
Sets the time before the projector automatically turns off (Sleep
Mode must be turned on)
Regulates the projector's operating temperature at altitudes
above 4921 feet (1500 m)
Automatically detects the image signal being input when the
projector is turned on
222
Advertisement
Table of Contents
