Table of Contents
Advertisement
22
Troubleshooting
Error
•
There is no picture on se-
lected channels / camera
picture is not being displayed.
•
The system beeps at startup.
•
The system beeps during
motion detection.
•
I am not receiving email
notifications.
#LX400094; r.43927/43955; en-US
Possible Causes
Camera cables are loose or have
become disconnected.
Motion detection is enabled and
the alarm buzzer is activated.
Email notification is disabled.
Send Email setting not enabled
in Event menu.
Solutions
•
Check the camera video ca-
ble and connections.
•
Disconnect and reconnect
the cable at the system and
at the camera.
•
Try moving the camera to an-
other channel or use another
cable.
The beep at startup is normal.
Open the Main Menu and click
> Event > Motion >
Motion Detect. Uncheck Buz-
zer for any channels you want to
disable the buzzer for and click
Apply.
Ensure you have configured
email notification. For details,
see 13.3.5 Configuring Email
Alerts, page 70.
Make sure that Send Email is
enabled for any events you want
to be notified of.
210
Advertisement
Table of Contents
