Philips AVENT SCD620/79 Manual page 12

14
English
VIDEO
1
VIDEO 20°C
1
VIDEO 20°C
AUDIO
With the baby monitor on, you can switch between these 4 different modes
by pressing the mode button on the side of the parent unit.
The display shows the selected mode. The selected mode is also indicated
in the status bar. When turning on the device, the mode that was last used
will be active.
VIDEO mode
Press the mode button on the side of the parent unit to select the VIDEO
mode.
When the VIDEO mode is activated, the screen is always on, so you can see
your baby. All sounds are directly transmitted to the parent unit.
Note: Set the sensitivity level to 'very high' to have continuous sound on the
parent unit. Please see the Sensitivity level chapter for more information.
AUDIO mode
1 Press the mode button on the side of the parent unit to switch to AUDIO
mode.