I Time & Date; I Alarm - Panasonic WJ-SX650/G Operating Instructions Manual

I TIME & DATE
You will set the current time and date.
When you select TIME & DATE on the top menu, the follow-
ing menu is displayed.
Note: Display format setting is performed in "Display" –
"Display" of WJ-SX650 Series Administrator Console.
100 TIME&DATE
31/08/2005
DST/SUMMER TIME
• Year
2005 to 2099
• Month
1 to 12 (When Date Format is set to DD/MM/YYYY,
MM/DD/YYYY, YYYY/MM/DDDD
Administrator Console)
Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec
(When Date Format
Mmm/DD/YYYY in WJ-SX650 Series Administrator Console)
• Day
1 to 31
• Time
0 to 23(When Time Format is set to 24-h in WJ-SX650
Series Administrator Console)
1 to 12(When Time Format is set to 12-h in WJ-SX650
Series Administrator Console)
AM /PM (When Time Format is set to 12-h in WJ-SX650
Series Administrator Console)
• Minute
0 to 59
• DST/SUMMER TIME
ON/OFF
The factory default is as follows.
01/01/2005 00:00, DST/SUMMER TIME ON
Notes:
• When DST/SUMMER TIME is set to ON, the daylight
saving time (summer time) is activated during the spec-
ified period. ("∗" is displayed beside the time.) The peri-
od setting is performed in "Display" – "DST/Summer
Time" of WJ-SX650 Series Administrator Console.
• This setting is not available for WJ-RT416 Series.
50
∗20:15
ON
in WJ-SX650
is set to DD/Mmm/YYYY

I ALARM

You will perform the settings of alarms (terminal alarms,
camera alarms, recorder alarms, serial alarms, and video
loss).
When you select ALARM on the top menu, the following
menu is displayed.
300 ALARM
310 ALARM MODE
320 AUTO RESET
330 TERMINAL ALARM
340 CAMERA ALARM
350 RECORDER ALARM
360 SERIAL ALARM
370 VIDEO LOSS
G ALARM Menu
• ALARM MODE
Select the display pattern to display spot alarm pictures on
the associated
Series
SEQUENCE.)
SEQUENCE: Alarm pictures are sequentially displayed on
or
the associated monitor. Select desired DWELL TIME
from 1 to 30 sec. (The factory default is 2 sec.)
LATEST: The latest alarm picture is displayed on the moni-
tor.
EARLIEST: The earliest alarm picture is displayed on the
monitor.
• AUTO RESET
Select the period until an alarm is automatically reset. If you
select OFF, you will reset the alarm manually. (The factory
default is 30 sec.)
OFF/1, 2... to 10 sec/20 sec/30 sec/1 min/3 min/5 min
• TERMINAL ALARM
Select ON or OFF to accept or not accept terminal alarm
input signals. (The factory default is ON.)
ON: Accepts terminal alarm input signals.
OFF: Not accepts terminal alarm input signals.
Note: If you select ON, you can move to the TERMINAL
ALARM menu (refer to p. 51), and you can set the
details on terminal alarm input signal.
• CAMERA ALARM
Select ON or OFF to accept or not accept camera alarm
input signals. (The factory default is OFF.)
ON: Accepts camera alarm input signals.
OFF: Not accepts camera alarm input signals.
SEQUENCE
B DWELL TIME 2sec
OFF
ONO
OFF
OFF
ON
ON
monitors. (The factory default is