Table of Contents
Advertisement
6 Product
specifications
Note
•
Specifications and design are subject to change without
notice.
Amplifier
•
Total output power: 100W RMS
(+/- 0.5 dB, 30% THD) / 80W RMS
(+/- 0.5 dB, 10% THD)
•
Frequency response: 63 Hz-20 kHz /
±3 dB
•
Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
•
Input sensitivity:
•
AUDIO IN: 400 mV
Audio
•
S/PDIF Digital audio input:
•
Coaxial: IEC 60958-3
•
Optical: TOSLINK
Bluetooth
•
Bluetooth profiles: A2DP
•
Bluetooth version: 3.0 (EDR)
USB
•
USB connector (not for media play):
•
Used for software upgrade of this
product
•
Used to charge a USB device
•
5V
1A
Main unit (left and right speakers)
•
Power supply: 110-240 V~, 50/60 Hz
•
Power consumption: 50 W
•
Standby power consumption: ≤ 0.5 W
•
Speaker impedance:
•
Woofer: 4 ohm
•
tweeter: 8 ohm
•
Speaker drivers: 2 x 101.6 mm (4") woofer
+ 2 x 25.4 mm (1") tweeter
•
Dimensions (WxHxD):
160 x 305 x 160 mm
•
Weight: 4.4 kg
Remote control batteries
•
1 x CR2025
Standby information
•
When the product remains inactive for
15 minutes, it automatically switches to
standby or networked standby.
•
The power consumption in standby or
networked standby is less than 0.5W.
•
To deactivate Bluetooth connection, press
and hold the Bluetooth button on the
remote control.
•
To activate Bluetooth connection, enable
Bluetooth connection on your Bluetooth
device, or enable Bluetooth connection via
the NFC tag (if available).
EN
13
Advertisement
Table of Contents
