Product Specifications - Philips HTL9100/93 User Manual

Table of Contents

Advertisement

6 Product
specifications
Note
Specifications and design are subject to change without
notice.
Amplifier
Total output power:
210W RMS (+/- 0.5 dB, 30% THD) /
168W RMS (+/- 0.5 dB, 10% THD)
Frequency response:
20 Hz-20 kHz / ±3 dB
Signal-to-noise ratio:
> 65 dB (CCIR) / (A-weighted)
Input sensitivity:
• AUX: 400 mV
• AUDIO-IN: 200 mV
Audio
S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
Bluetooth
Bluetooth profiles: A2DP
Bluetooth version: 2.1 + EDR
Main unit
Power supply: 110-240 V~, 50/60 Hz
Power consumption: 50 W
Standby power consumption: ≤ 0.5 W
Speaker impedance:
• Woofer: 8 ohm
• tweeter: 8 ohm
Speaker drivers: 2 x 63.5 mm (2.5") woofer
+ 2 x 25.4 mm (1") tweeter
EN
14
Dimensions (W x H x D):
1035 x 73 x 156 mm (with 2 surround
speakers attached)
Weight: 3.9 kg
Surround speakers
Speaker impedance: 8 ohm
Speaker drivers: 2 x 63.5 mm (2.5") full
range
Dimensions (W x H x D):
191 x 73 x 156 mm
Weight: 0.7 kg/each
Subwoofer
Power supply: 110-240 V~, 50/60 Hz
Power consumption: 30 W
Standby power consumption: ≤ 0.5 W
Impedance: 4 ohm
Speaker drivers: 1 x 165 mm (6.5") woofer
Dimensions (W x H x D):
200 x 510 x 201 mm
Weight: 4.9 kg
Wall mount
Dimensions (W x H x D):
40 x 100 x 26.5 mm
Weight: 0.1 kg/each
Remote control batteries
2 x AAA-R03-1.5 V

Advertisement

Table of Contents
loading

This manual is also suitable for:

Htl9100

Table of Contents