Table of Contents
Advertisement
5
To exit Bluetooth, select other source.
•
When your switch back to Bluetooth
mode, Bluetooth connection remains
active.
Note
•
The music streaming may be interrupted by obstacles
between the device and this product, such as wall,
metallic casing that covers the device, or other devices
nearby that operate in the same frequency.
•
If you want to connect this product with another
Bluetooth device, press and hold
the remote control to break the current Bluetooth
connection.
Play music via NFC
NFC (Near Field Communication) is a
technology that enables short-range wireless
communication between NFC-enabled devices,
such as mobile phones.
What you need
•
A Bluetooth device with NFC function.
•
For pairing, tap the NFC device on the
NFC tag of this product.
•
The operational range between the
main unit (left and right speakers) and a
NFC device is approximately 10 meters
(30 feet).
1
Enable NFC on the Bluetooth device (see
the device' s user manual for details).
2
Tap the NFC device on the NFC tag of
this product until you hear a beep sound
from this product.
» The blue LED on the left speaker lights
up, and the NFC device is connected
to this product via Bluetooth.
» If the connection fails, the blue LED on
the left speaker blinks continually.
Bluetooth on
3
Select and play audio files or music on
your NFC device.
•
To break the connection, tap again the
NFC device with the NFC tag on this
product.
Auto standby
If no audio/video playback is detected from a
connected device for 15 minutes, this product
automatically switches to standby.
Apply factory settings
You can reset this product to the default
settings programmed at the factory.
1
In any source mode, press and hold
RESET for five seconds.
» When the factory settings restore is
complete, the product automatically
switches off and restarts.
EN
11
Advertisement
Table of Contents
