All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise without the prior permission of WOOX Innovations. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V.
BTS3000 Specification General Model Name: BTS3000 connected audio speaker Main features: 1. Audio source: AUX IN/Bluetooth/Coaxial/Optical Bluetooth with APT-X decoder, Coaxial, Optical support PCM format only 2. Audio output power: 2X10W at THD 10% Bass driver: 4 inch, Tweeter: 0.75 inch.
Page 4
BTS3000 Audio Specification 1. Coaxial and Optical Test Conditions a) Speaker output load: 2* 6, b) Input PCM audio signal from coaxial/ optical sources. Standard: IEC60958-3, TOSLINK Limi Item Condition Norm. Unit Remark 20Hz- Output Power 20kHz Load 6 L/R At 10% THD ℃...
Page 5
BTS3000 2. AUX IN Test Conditions b) Speaker output load: 2* 6 Limi Item Condition Norm. Unit Remark 20Hz- Output Power 20kHz Load 6 L/R At 10% THD ℃ Operating Temperature 0-40 Input 1kHz SNR (A-weighted) Input 100— 16KHz +/-3dB...
Page 6
BTS3000 3. Bluetooth streaming Test Conditions c) Speaker output load: 2* 6, b) Streaming audio signal from iPhone 4/iPad2 Limi Item Condition Norm. Unit Remark 20Hz- Output Power Load 6 L/R 20kHz At 10% THD ℃ Operating Temperature 0-40 Input 1kHz SNR (A-weighted) Input 100—...
BTS3000 Remote Control (RC6, 36KHz) Description Specification Test Condition >10m 0 deg. 30 deg. (hor. & vert.) Operating distance >7.92 45 deg. (horizontal) >5,65 LED indicator Source Color Power/BT white Optical white Coaxial white Aux‐in/RCA white Power Supply (fulfil ERP2 requirement)
Page 8
BTS3000 Test Method: EN61000-4-2 • Ambient temperature : 15 – 35 °C • Humidity: 30 – 50% • Pre-condition for the set before test : put the set into the ESD room at least 4 hours • Supply: AC • Set condition: Audio mode Test requirement: •...
Page 9
BTS3000 Mechanical Specification Item Limit Remarks Drop Test: Limit Remarks Criteria: set has no Bare Drop (w/o packing) functional damage & major cosmetic defect after test. 70cm Face drop / Criteria: set has no Normal Drop with full package 35cm Edge&Corner functional damage &...
BTS3000 Disassembly Instruction Open the speaker 1) Unscrew 13 screws at the back side of speaker Note: 2 screws on power cord socket does not need Rmove the AMP board module from speaker 1) Unplug two connectors from sockets on volume board...