Mp3 Player; Play Music Via Bluetooth - Philips 5000 Series User Manual

Equalizer
Change the high frequency (treble) and
low frequency (bass) settings of this
product.
1
Press TREBLE +/- or BASS +/- to
change the frequency.
Synchronize video and sound
If the audio and video are not
synchronized, delay the audio to match
the video.
1
Press AUDIO SYNC +/- to
synchronize the audio with the
video.
Night mode
For quiet listening, night mode
decreases the volume of loud sounds
when audio is played. Night mode
is only available for Dolby Digital
soundtracks.
1
Press NIGHT to turn night mode on
or off.
•
When night mode is turned on,
ON NIGHT (night on) scrolls
once on the display panel.
• When night mode is turned off,
OFF NIGHT (night off) scrolls
once on the display panel.

MP3 player

Connect your MP3 player to play your
audio files or music.
What you need
•
An MP3 player.
• A 3.5mm stereo audio cable.
1
Using the 3.5mm stereo audio
cable, connect the MP3 player to
the AUDIO IN connector on this
product.
EN
12
2
Press AUDIO IN.
3
Press the buttons on the
MP3 player to select and play audio
files or music.
•
On the MP3 player, it is
recommended to set the volume
in the range of 80% maximum
volume.

Play music via Bluetooth

Through Bluetooth, connect your
product with a Bluetooth device (such
as an iPad, iPhone, iPod touch, Android
phone, or laptop), and then you can
listen to the audio files stored on the
device through the speakers of this
product.
What you need
•
A Bluetooth device which supports
Bluetooth profile A2DP, and with
Bluetooth version as 4.1.
•
The operational range between the
main unit and a Bluetooth device is
approximately 10 meters (30 feet).
1
Press on the remote control to
switch this product to Bluetooth
mode.
» BT is displayed on the display
panel, blinking.
2
On the Bluetooth device, switch
on Bluetooth, search for and select
Philips CSS5530 to start connection
(see the user manual of the
Bluetooth device on how to enable
Bluetooth).
•
For first time connection, on
some mobile devices prompt for
pair-up appears, select "YES" for
connection.
» During connection, BT on the
display panel blinks.