Table of Contents
Advertisement
[SD]
[FILMLIKE1]
[FILMLIKE2]
[FILMLIKE3]
[FILM-REC]
[VIDEO-REC]
[HLG]
[GAMMA SETTING]
[MASTER GAMMA]
Sets the master gamma in 0.01 steps.
The items that can be set are as follows.
f [0.30]...[0.75]
[F-REC DYNAMIC LVL]
When [FILM-REC] is selected in [GAMMA MODE SEL], dynamic range is set.
No settings are changed if an item other than [FILM-REC] is selected.
The items that can be set are as follows.
f [200%] ... [600%] (100% step)
[F-REC BLACK STR LVL]
When [FILM-REC] is selected in [GAMMA MODE SEL], black stretch is set.
No settings are changed if an item other than [FILM-REC] is selected.
The items that can be set are as follows.
f [0%]...[30%]
[V-REC KNEE SLOPE]
When [VIDEO-REC] is selected in [GAMMA MODE SEL], knee slope is set.
No settings are changed if an item other than [VIDEO-REC] is selected.
The items that can be set are as follows.
f [150%] ... [500%] (50% step)
[V-REC KNEE POINT]
When [VIDEO-REC] is selected in [GAMMA MODE SEL], knee point is set.
No settings are changed if an item other than [VIDEO-REC] is selected.
The items that can be set are as follows.
f [30%]...[107%]
[BLACK GAMMA]
Sets the gamma curves of dark areas.
[−8]...[−1]
[0]
[1]...[8]
[B.GAMMA RANGE]
Sets the maximum level of compression/expansion.
[1]
[2]
[3]
[KNEE SETTING]
[KNEE MODE]
Sets the knee operation mode.
The items that can be set are as follows.
f [AUTO], [MANUAL], [OFF]
[A.KNEE RESPONSE]
Sets the auto knee response speed. The smaller the setting value, the faster the response speed is.
The items that can be set are as follows.
f [1]...[8]
[KNEE POINT]
Sets the knee point position in 0.5% steps.
The items that can be set are as follows.
f [70.0%]...[107.0%]
Chapter 4 Operation — Menu settings
Increases gain in darker areas more than HD gamma.
Sets the characteristics that reproduce more highlight areas compared to HD gamma.
Sets the characteristics that reproduce more highlight areas compared to [FILMLIKE1].
Sets the characteristics that reproduce more highlight areas compared to [FILMLIKE2].
Sets the cine gamma characteristics for film.
Sets the cine gamma characteristics for video.
Sets the hybrid log gamma (HLG) characteristics.
Compresses the dark area.
Standard state
Expands dark areas.
Around 20%
Around 30%
Around 40%
– 74 –
Advertisement
Table of Contents
