Table of Contents
Advertisement
Alert
Screen display
Camera image screen
[SIMUL REC WARNING <SLOT 1>]/
[SIMUL REC WARNING <SLOT 2>]
[SIMUL REC WARNING <SLOT 1>]/
[SIMUL REC WARNING <SLOT 2>]
[BACKGROUND REC WARNING
<SLOT 1>]/[BACKGROUND REC
WARNING <SLOT 2>]
[BACKGROUND REC WARNING
<SLOT 1>]/[BACKGROUND REC
WARNING <SLOT 2>]
[FAN STOPPED]
[CHECK CARD <SLOT 1>]/[CHECK
CARD <SLOT 2>]
[FORMAT ERROR CARD <SLOT 1>]/
[FORMAT ERROR CARD <SLOT 2>]
[NOT SDXC CARD <SLOT 1>]/[NOT
SDXC CARD <SLOT 2>]
[INCOMPATIBLE CARD <SLOT 1>]/
[INCOMPATIBLE CARD <SLOT 2>]
[BACKUP BATT EMPTY]
Chapter 10 Notes — Warning system
Description
An error has occurred in one of the memory cards during
simultaneous recording.
Recording has been attempted while the number of clips
has exceeded the limit on one of the memory cards during
simultaneous recording.
An error has occurred in one of the memory cards during
background recording.
Recording has been attempted while the number of clips
has exceeded the limit on one of the memory cards during
background recording.
The fan has stopped.
The memory card cannot be recognized properly because
a recording medium which is not supported has been
inserted or there is dirt on the terminal of the memory card.
A memory card with management information out of
specifications has been inserted.
(Include when the system frequency (59.94 Hz system or
50.00 Hz system) for the AVCHD format of the memory
card is different from the setting in the [SYSTEM] menu →
[FREQUENCY])
A SDHC memory card that cannot record the MOV format
data or a 32 GB microP2 card is inserted when [FILE
FORMAT] is set to MOV format.
A memory card that may not be able to record due to slow
writing speed has been inserted.
Voltage lowering of the backup battery for internal clock
was detected when the power is set to < j > (ON).
A message is displayed for approximately five seconds.
f Recording to the other memory card will continue.
A message is displayed for approximately five seconds.
f Recording to the other memory card will continue.
f [SIMUL REC WARNING <SLOT 1>] [<OVER MAX
NUM. OF CLIPS>]/[SIMUL REC WARNING <SLOT 2>]
[<OVER MAX NUM. OF CLIPS>] is displayed in the
warning display field of the STATUS screen for the mode
check.
f Replace the memory card or delete unnecessary clips.
A message is displayed for approximately five seconds.
f Recording to the other memory card will continue.
A message is displayed for approximately five seconds.
f Recording to the other memory card will continue.
f [BACKGROUND REC WARNING <SLOT 1>] [<OVER
MAX NUM. OF CLIPS>]/[BACKGROUND REC
WARNING <SLOT 2>] [<OVER MAX NUM. OF CLIPS>]
is displayed in the warning display field of the STATUS
screen for the mode check.
f Replace the memory card or delete unnecessary clips.
A message is displayed.
f The current operation will continue.
f Stop the use immediately when the fan has stopped, and
consult the dealer.
f If the fan has stopped, temperature of the camera will
rise. Therefore, do not use the camera for a long period
of time.
A message is displayed for approximately five seconds.
f Check the memory card that is inserted.
f Insert the memory card again if displayed when inserting
a memory card.
A message is displayed for approximately five seconds.
f Insert a memory card that can record.
f The system frequency information for the AVCHD format
is confirmed at the time of formatting or at the first
recording.
A message is displayed for approximately five seconds.
f Insert a SDXC memory card or 64 GB microP2 card.
A message is displayed for approximately five seconds.
f The current operation will continue.
f Use a memory card with sufficient writing speed.
A message is displayed for approximately five seconds.
f The current operation will continue.
f Set the date/time again after charging the built-in battery.
– 185 –
Behavior and cause
Advertisement
Table of Contents
