Playing Back Clips - Panasonic AG-CX350E Operating Instructions Manual

Playing back clips

1
In the [SYSTEM] menu → [FREQUENCY], select the system frequency to play back.
2
In the [SYSTEM] menu → [FILE FORMAT], select the file format (MOV or AVCHD) to play back.
3
In the [SYSTEM] menu → [REC FORMAT], select the signal format and codec mode to play back.
4
Press the <THUMBNAIL> button.
The thumbnail screen is displayed.
5
Press the <MENU> button while the thumbnail screen is displayed.
The menu is displayed.
6
In the [THUMBNAIL] menu → [PLAYBACK] → [CLIP SEL], select the card slot of the memory card to play back.
[ALL SLOT]: Displays all the clips recorded on every memory card in each card slot. Displays in the order of the clips in card slot 1, and then clips in
the card slot 2.
[SLOT1]: Displays only the clips recorded on the memory card in card slot 1.
[SLOT2]: Displays only the clips recorded on the memory card in card slot 2.
[SAME FORMAT]: Displays only the clips recorded in the same format as the system format.
Clips recorded in the same format match the current settings for each item of the [SYSTEM] menu → [FREQUENCY]/[FILE FORMAT]/[REC
FORMAT].
7
Select the clip to play back. (Fig. 1)
f is displayed on the clip that cannot be played back.
f To play back the clip with
Playback from button operations and operation icons
Playback operation
Playback/pause
Fast-reverse playback
Fast-forward playback
Stop (return to thumbnail screen)
Chapter 6 Playback — Thumbnail operation
displayed, check the information of the clip with the clip information, and try operating from the beginning again.
TCR 12:59:59:23
CH1
CH2
Touch / or press the <=/&> button.
Touch or press the <%> button. Touch twice to increase the speed.
Touch or press the <)> button. Touch twice to increase the speed.
Touch or press the <(> button.
Direct playback bar
Operating procedure
– 146 –