Table of Contents
Advertisement
Chapter 4: AMI BIOS
*If any USB storage deviced is detected, "USB Key Drive BBS Priorities"
will become available for configuration.
USB Key Drive BBS Priorities
Use this feature to specify the Boot Device Priority sequence from avail-
able USB Key Drives. The options are SMI USB DISK 110 and Disable.
Boot Override
Saves the specified boot override and resets the system, i.e., IBA CL
Slot 00FE v0110. Select OK to activate, otherwise, click Cancel.
Launch EFI Shell from filesystem device
This feature will attempt to launch the EFI Shell application (shell.efi)
from one of the available file system devices. Select OK to activate,
otherwise, click Cancel.
Save Options
Save Changes and Reset
This feature will save the changes that have been made and reboot the
system.
Discard Changes and Reset
This feature will discard the changes that have been made and reboot
the system.
Save Changes
This feature will save the changes, but remain in setup mode.
Discard Changes
This feature will discard the changes, but will remain in setup mode.
Save Profile 1 / Save Profile 2
Select this feature to save the current overclocking profile into either
Profile 1 or Profile 2. Click "OK" when prompted, click "Cancel" to go
back and not save.
Load Profile 1 / Load Profile 2
Select this feature to load a previously saved overclocking profile from
either Profile 1 or Profile 2. Click "OK" when prompted, click "Cancel" to
go back and not load.
4-57
Advertisement
Table of Contents
