Supermicro Supero C7Z370-CG-L User Manual page 100

Supermicro C7Z370-CG-L Motherboard User's Manual
Max Link Speed
Select Auto, Gen1, Gen2, or Gen3 to set the PEG Max Link Speed.
Max Link Width
Select Auto, Force X1, Force X2, Force X4, and Force X8 to set the
PEG Max Link Width.
Power Down Unused Lanes
Use this feature to power down the unused lanes based on the max
possible link width. The options are Disabled and Auto.
VT-d
Select Enabled to use Intel
d) support by reporting the I/O device assignments to the VMM (Virtual
Machine Monitor) through the DMAR ACPI tables. This feature offers fully
protected I/O resource sharing across Intel platforms, providing greater
reliability, security and availability in networking and data sharing. The
options are Disabled and Enabled.
GMM Device (B0:D8:F0)
Use this feature to enable or disable the SA GMM device. The options
are Disabled and Enabled.
X2APIC Opt Out
X2APIC, an extension of the XAPIC architecture, is designed to support
32-bit processor addressability. X2APIC enhances the performance of
interrupt delivery. The options are Disabled and Enabled.
Virtualization Technology for Direct I/O (VT-
®
4-32