Pairing Wireless Subwoofer - LG NB5630A Owner's Manual

14 Connecting

Pairing wireless subwoofer

Setting up the wireless subwoofer
for the first time
1. Connect the power cord of the wireless
subwoofer to the outlet. The Yellow-green LED
on the subwoofer starts to blink.
2. Turn on the main unit. The red LED on it starts to
2
blink and then the main unit and the subwoofer
will be automatically connected.
When connection is completed, the Yellow-
green LED on the subwoofer is turned on and
the green LED on the main unit is lit up for
about 3 seconds.
Information of the color LED indicators
State
Standby
Initial pairing
Pairing
Connected
Disconnected
,
Note
y If you operate main unit then wireless
subwoofer sound within a few seconds in
standby mode.
y Set the distance between this unit and
wireless subwoofer within 10 m.
y Optimum performance can be
implemented only when the unit and the
Wireless subwoofer within distance of 2 m
to 10 m is used since communication failure
may occur if longer distance is used.
y It takes a few seconds (and may take longer)
for the unit and subwoofer to communicate
with each other.
NB5630A-NS.DDEULLK_ENG.indd 14
Manually pairing wireless subwoofer
When the connection has been failed between the
main unit and the wireless subwoofer, the red LED
on the subwoofer is turned on. To pair them, follow
the steps below.
1. Press PAIRING on the back of the subwoofer.
The Yellow-green LED on the wireless
subwoofer starts to blink.
2. Press and hold
(Mute) on the remote control at the same time.
The green LED on the main unit starts to blink.
3. After the Yellow-green LED on the subwoofer
is turned on, press the buttons on step 2 again.
The connection will be completed.
Sound bar LED
Red
Red (Blink)
Green (Blink)
Green [ Off
Off
(Volume) on the unit and
Wireless subwoofer LED
Red
Yellow-green (Blink)
Yellow-green (Blink)
Yellow-green
Yellow-green (Blink) [ Red
2013-10-23 9:14:48