Setting Up; Pairing Wireless Subwoofer - LG SHS36-D Owner's Manual

12 Connecting

Setting up

Pairing wireless subwoofer

LED indicator of wireless subwoofer
LED Color
2
Blue
Blue (blink)
Red
Off (No
display)
Setting up the wireless subwoofer
for the first time
1. Connect the power cord of the Wireless
subwoofer to the outlet.
2. Turn on the main unit : The main unit and
wireless subwoofer will be automatically
connected.
HLS36W-NB_DPANLLK_ENG_0448.indd 12
Status
The wireless subwoofer is
receiving the signal of the unit.
The wireless subwoofer is trying
to connect.
The Wireless subwoofer is in
standby mode.
The Wireless subwoofer is
turned off.
Manually pairing wireless subwoofer
When your connection is not completed, you can
see the red LED on the woofer and woofer is not
made sound. To solve the problem, follow the
below steps.
1. Press and hold I STOP button on the unit
and MUTE button on the remote control
simultaneously.
- Displays the "REMATE".
2. Press PAIRING on back of the woofer.
- The blue LED will flicker
3. Turn off and on the unit.
- If you see "blue" LED, it' s successful.
4. If you don't see "blue" LED, try again Step 1 -
Step 3.
, ,
Note
y If you operate main unit then wireless
subwoofer (rear speakers) sound within a
few seconds in standby mode.
y Set the distance between this unit and
subwoofer Receiver within 10 m (32 ft.).
y Optimum performance can be
implemented only when the unit and
the Wireless subwoofer within distance
of 2 m (6 ft.) to 10 m (32 ft.) is used since
communication failure may occur if longer
distance is used.
y It takes a few seconds (and may take longer)
for the Wireless Transmitter and subwoofer
to communicate with each other.
2011-07-13 3:51:40