Connecting; Speaker Connection; Pairing Wireless Subwoofer; Led Indicator Of Wireless Subwoofer - LG NB3730A Owner's Manual

Speaker Connection

Pairing wireless subwoofer

LED indicator of wireless subwoofer

LED Color Status
Yellow-green The wireless subwoofer is
receiving the signal of the unit.
Yellow-green The wireless subwoofer is trying
(blink) to connect.
Red The Wireless subwoofer is in
standby mode.
Off (No The power cord of wireless
display) subwoofer is disconnected.
Setting up the wireless subwoofer
for the first time
1. Connect the power cord of the Wireless
subwoofer to the outlet.
2. Turn on the main unit : The main unit and
wireless subwoofer will be automatically
connected.

Manually pairing wireless subwoofer

When your connection is not completed, you can
see the red LED on the woofer and woofer is not
made sound. To solve the problem, follow the
below steps.
1. Press and hold Z (Stop) button on the unit
and MUTE button on the remote control
simultaneously.
- Displays the "REMATE".
2. Press PAIRING on back of the woofer.
- The Yellow-green LED will flicker.
3. Turn off and on the unit.
- If you see "Yellow-green" LED, it' s successful.
4. If you don't see "Yellow-green" LED, try again
Step 1 - Step 3.
,
Note
y If there is a strong electromagnetic wave
product nearby, interference may occur. Put
the unit (Wireless subwoofer and main unit)
away from there.
y If you operate main unit then wireless
subwoofer sound within a few seconds in
standby mode.
y Set the distance between this unit and
subwoofer Receiver within 10 m (32 ft.).
y Optimum performance can be
implemented only when the unit and
the Wireless subwoofer within distance
of 2 m (6 ft.) to 10 m (32 ft.) is used since
communication failure may occur if longer
distance is used.
y It takes a few seconds (and may take longer)
for the Wireless Transmitter and subwoofer
to communicate with each other.

Connecting

13 13
2