Pairing Wireless Subwoofer - LG NB5530A Owner's Manual

14 Connecting

Pairing wireless subwoofer

Setting up the wireless subwoofer
for the first time
1. Connect the power cord of the wireless
subwoofer to the outlet. The yellow-green LED
on the subwoofer starts to blink.
2. Turn on the sound bar. The red LED on it
2
starts to blink and then the sound bar and the
subwoofer will be automatically connected.
When connection is completed, the yellow-
green LED on the subwoofer is turned on and
the green LED on the sound bar is lit up for
about 3 seconds.
Information of the colour LED indicators
State
Standby
Initial pairing
Pairing
Connected
Disconnected
,
Note
y If you operate main unit then wireless
subwoofer sound within a few seconds in
standby mode.
y Set the distance between this unit and
wireless subwoofer within 10 m (32 ft.).
y Optimum performance can be
implemented only when the unit and
the Wireless subwoofer within distance
of 2 m (6 ft.) to 10 m (32 ft.) is used since
communication failure may occur if longer
distance is used.
y It takes a few seconds (and may take longer)
for the unit and subwoofer to communicate
with each other.
NB5530A-NB_DAUSLLK_ENG.indd 14
Manually pairing wireless subwoofer
When the connection has been failed between the
sound bar and the wireless subwoofer, the red LED
on the subwoofer is turned on. To pair them, follow
the steps below.
1. Press PAIRING on the back of the subwoofer.
The yellow-green LED on the wireless
subwoofer starts to blink.
2. Press and hold p (Volume) on the unit and
i(Mute) on the remote control at the same
time. The green LED on the sound bar starts to
blink.
3. After the yellow-green LED on the subwoofer
is turned on, press the buttons on step 2 again.
The connection will be completed.
Sound bar LED
Red
Red (Blink)
Green (Blink)
Green [ Off
Off
Wireless subwoofer LED
Red
Yellow-green (Blink)
Yellow-green (Blink)
Yellow-green
Yellow-green (Blink) [ Red
2013-10-22 3:19:45