Yaesu FR5DR Operating Manual page 49

5. Rotate the DIAL knob to select the desired Bluetooth
device.
6. Touch [CONNECT].
7. When pairing is complete and connected, the
®
Bluetooth headset model name is displayed.
SSM-BT10: LED blinks blue.
8. Press the PTT switch to return to the normal operation.
While connected to a Bluetooth
screen, and the received audio and operation beep will be heard from the Bluetooth
headset.
Disable the Bluetooth function
To cancel Bluetooth
step 4 above.
Subsequent Bluetooth
⿠When the power is turned OFF while the Bluetooth
time the power is turned ON, the same Bluetooth
matically connected when found.
®
⿠If the Bluetooth
If the power of the same Bluetooth
automatically. If not, turn the FT5DR/DE and Bluetooth
again.
⿠To connect to other Bluetooth
headset" on page 49.
®
headset, the "
®
operation, just repeat the above procedures, selecting "OFF" in
®
headset connection when the power is turned ON
headset cannot be found, the "
®
headsets, refer to the "Connect with another Bluetooth
" icon lights up on the FT5DR/DE
®
®
headset is searched for and auto-
" icon flashes on the screen.
®
headset is turned ON in this state, it will connect
®
SSM-BT10
SSM-BT10
yaesu-01
yaesu-02
yaesu-03
R556
headset is connected, the next
®
headset OFF and then ON
®
®
47