Guide To Entering Service Mode And Factory Reset (Pd100) - Acer PD100 Service Manual

Guide to Entering Service Mode and Factory Reset
No Item
1 Service Mode
2 Factory Reset
53
Please do the following steps to enter Service Mode:
1. Turn on the projector.
2. Press "Power", "Left" button, "Left" button and "Menu" by order to enter the
Service Mode. (As the following pictures show)
1
Power
After final QC step, we have to erase all saved change again and restore the
factory defaults. The following actions will allow you to erase all end-users'
settings and restore the original setting:
1. Please enter the servcie mode,
2. Choose "Factory Reset" then choose "Yes" and press "Enter" to see if it works.
Steps
2
3
"Left" button
"Left" button
(PD100)
4
Menu
Chapter 4