No
Procedure
1. Assemble the DMD Board
Components.
2. Screw 4 big hex screws to
assemble the DMD Board.
3. Screw 4 screws and put on
1 EMI tape to assemble the
Heatsink.
4
Screw 1 screw to assemble
the Photo Sensor Board.
5
1. Screw 1 screw to assemble
the Light Cut.
2. Screw 1 screw to assemble
the Thermal Sensor.
6
Assemble 3 screws to
assemble the Engine Module.
35
Photo
1
2
Chapter 3