Guide to Entering Service Mode and Factory Reset
No
Item
1
Service Mode
2
Factory Reset
53
Please do the following steps to enter Service Mode:
1. Turn on the projector.
2. Press "Power", "Left" button, "Left" button and "Menu" by order to enter the
Service Mode. (As the following pictures show)
1
"Left" button
Power
After final QC step, we have to erase all saved change again and restore the
factory defaults. Execute the Factory Reset to restore the deault setting.
Steps
2
3
"Left" button
(PD100)
4
Menu
Chapt er 4