Electro-Voice R300-L User Manual page 9

R300
R300
ClearScan
ClearScan
SET
e. Press the SYNC button on the receiver to transfer the channel information.
f. The receiver will display SYNC until the data is transferred, then return to the main screen.
g. The transmitter display screen will now show the new channel and frequency.
h. I f the channel data was not transferred to the transmitter after 5 seconds, the receiver
will display ERROR. Be certain that the transmitter is On and the EZsync port is facing the receiver
and try again.
i. I f the data still does not transfer, try new batteries, or move the unit to a shaded area away from
direct sunlight before trying again.
SET
R300
EZsync R300 Clear
EZsync Clear
EZsync
EZsync
SYNC
SYNC
9