Transmitter - Electro-Voice R300-L User Manual

QUick seT-Up: transMitter
1. With the Power switch on the transmitter OFF, install two fresh AA batteries into the transmitter.
2. Press the transmitter Power Switch until the display comes on.
3. Hold the transmitter with the EZsync Port facing the receiver, about a foot (30 cm) away.
EZsync
R300
SYNC
ClearScan
R300
EZsync Clear
SET
4. Press the SYNC Button on the receiver, SYNC will show in the display.
5. O nce the channel is set in the transmitter, the display will switch to the main
display and show RF and Audio Levels.
Transmitter "Quick Set-up" is complete.
5