Philips AVENT SCD630 Manual page 14

English
14
1
20°C
Brightness
1
20°C
Sound level lights
1
VIDEO 20°C
Tip: Make sure that the volume is adapted to the current conditions.
Under noisy conditions, the vibration alert can be turned on as well.
The volume bar appears on the display to show the selected volume.
Note: If the volume is set to a high level, the parent unit consumes more
power.
Note: When the volume bar is at its minimum, the volume is muted. The
parent unit shows a mute icon in the status bar and you will only receive
alerts and video from the parent unit.
You can adjust the display brightness of the parent unit to the level you
prefer.
1 Press the left or right part of the control button to adjust the brightness
of the display of the parent unit.
The brightness bar appears on the display to show the selected display
brightness.
Note: If the brightness is set to a high level, the parent unit consumes more
power.
The parent unit continuously monitors the sound level in your baby's room,
and the sound level lights on the parent unit let you know if there is any
sound picked up in the baby room.
As long as no sound is detected, the sound level lights are out.