The C.p.g. Function Switch; Selecting The C.p.g. And My C - A&D UB-533 Instruction Manual

6. The C.P.G. Function Switch

Refer to page 18 for the C.P.G. function that will indicate the proper
angle so that the height of the cuff is the same level as your heart.
1. After step 6 in page 9, press the
" " concerning the C.P.G. function.
2. Press the button to store the selection.
SET
3. If you do not use my C.P.G. function, press
to turn off. Proceed to "8. Measurement".
If you use my C.P.G. function, proceed to "7. Selecting the
C.P.G. and my C.P.G.".
7. Selecting the C.P.G. and my C.P.G.
You can select an indicator either the C.P.G. function or my C.P.G. .
Preset a proper posture (wrist angle) in memory if you use the my C.P.G. .
1. Adjust and keep the height of the blood pressure monitor to
the same level as your heart using your wrist angle.
2. Select an indicator using the
Indicator The C.P.G. function is used. (my C.P.G. function :
....
Data of my C.P.G. is deleted. Proceed to step 3.
Indicator my C.P.G. function is
....
when switched to the indicator . Proceed to step 3.
3. Press the button to turn off the device.
START
button to select either " " or
button
START
button.
ON and the current angle is stored
English 11
The C.P.G. function
button
To "7. Selecting the C.P.G. and my C.P.G." or
button and to "8. Measurement"
START
Step 1 [Adjust and keep the height
of the device (wrist angle) ]
HIGH
Correct Height
OFF )
LOW
Step 2 [Select The C.P .G. or my C.P.G.]
The C.P.G. function
button
Ex.: user 1
button and to "8. Measurement"
START
From step 6 of page 9
Press the button
SET
C.P.G. indicator
The
(Orange light)
(Blue light)
(Orange light)
My C.P.G.