General Power Tool Safety Warnings; Save All Warnings And Instructions For Future Reference - Makita DPJ140 Instruction Manual

Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
EC Declaration of Conformity
We Makita Corporation
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Cordless Plate Joiner
Model No./ Type: DPJ140,DPJ180
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by:
Makita International Europe Ltd.
Technical Department,
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
000230
Tomoyasu Kato
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for
future reference.
as the responsible
11.7.2011
Director
CORDLESS PLATE JOINER
SAFETY WARNINGS
1. Blades must be rated for at least the speed
marked on the tool. Blades running over rated
speed can fly apart and cause injury.
ENH101-16
2. Always use the guard. The guard protects the
operator from broken blade fragments and
unintentional contact with the blade.
3. Use only the blades specified for this tool.
4. Never operate the tool with the blade locked
in exposed position or without the blade
cover secured properly in place.
5. Make sure that the blade slides smoothly
before operation.
6. Check the blades carefully for cracks or
damage before operation. Replace cracked or
damaged blades immediately.
7. Make sure that the flange fits in the arbor hole
when installing the blade.
8. Inspect for and remove all nails or foreign
matter from the workpieces before operation.
9. Always place the workpieces on a stable
workbench.
10. Secure the workpieces firmly with clamp or
vise.
11. NEVER wear gloves during operation.
12. Hold the tool firmly with both hands.
13. Keep your hands and body away from the
grooving area.
14. Run the tool for a while without the blade
pointing toward anybody. Watch for vibration
or
installation or a poorly balanced blade.
15. Never reach your hands underneath the
workpieces while the blade is rotating.
16. Do not leave the tool running unattended.
17. Always be sure that the tool is switched off
GEA010-1
and the battery cartridge is removed before
making any adjustments or replacing the
blade.
18. Some material contains chemicals which may
be toxic. Take caution to prevent dust
inhalation and skin contact. Follow material
supplier safety data.
19. Do not use blunt or damaged blades.
20. Do not use the tool with damaged guards.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to safety
rules for the subject product. MISUSE or failure to
follow the safety rules stated in this instruction manual
may cause serious personal injury.
6
wobbling that could
GEB093-1
indicate poor