Table of Contents
Advertisement
1 Thumbnail display status (Page 65)
The types of clips displayed as thumbnails
appear in this area.
2 Repeat playback indicator (Page 63)
Displayed during repeat playback.
3 Card status display
Displays status of SD Memory Card.
4 Battery remaining display (Page 19)
Displays remaining battery capacity.
5 Cursor (yellow frame)
Displayed on currently selected thumbnail.
6 Recording mode display
Displays recording mode if clip currently
highlighted by cursor has been recorded in PH
mode.
7 Recording format display
Displays recording format of currently selected
clip.
8 Duration display
Displays duration of currently selected clip.
9 Time display (Page 65)
Displays time code at start of clip recording/
user information at start of clip recording/time
of recording/date of recording/date and time of
recording – according to settings.
10 Clip number
Displayed in order of recording (up to 1000
clips). Numbers of clips that cannot be played
back (e.g. clips of different recording formats)
are displayed in red. To play clips displayed
in red, set the PB format in the settings menu
PLAY SETUP screen to the appropriate
recording format (Page 63).
11
: Clip protect display
Displayed on protected clips.
12 Indicators
Shot mark
:
M
This indicates that a clip has a shot mark.
(Next page)
: Index
I
Displayed when indexes have been attached
(Page 66).
: Resume playback display
Displayed on clips on which resume playback
setting has been applied.
•
If " " appears on a thumbnail, the clip cannot
be played back.
•
When the thumbnail of a clip that was
repaired with AVCCAM Restorer is displayed
on the camera, a " " mark will appear on the
thumbnail if the format of the clip differs from
the playback format. Make sure to change the
playback format. (Page 63)
61
Advertisement
Table of Contents
