Nonlinear editing (PC mode)
Non-linear editing of video data on SD Memory
Cards can be performed by connecting the camera
via the USB connection cable to a computer for
editing. (As for connection, refer to page 72)
Use a sufficiently charged battery or the AC
adapter.
The following conditions are necessary for USB
connection.
•
PC with Windows XP, or Windows Vista;
Macintosh with Intel CPU (Intel Mac)
•
USB 2.0 (High Speed, Mass Storage Class)
compatibility (not compatible with USB 1.1)
•
Only connect to one computer at a time.
•
Camera cannot be operated if a hub or other
device is connected between the camera and
computer.
1
Insert the SD Memory Card, and move the
POWER switch to ON.
2
Press the mode button to illuminate the PB
lamp, and hold the button down again (for at
least 2 seconds).
The PC lamp will flash, and the camera will
change to PC mode.
3
Connect the camera to the computer with
the USB connection cable.
Turn the computer's power on before
connecting.
•
When the USB connection cable is not
connected, CHECK USB CABLE is
displayed.
4
Perform non-linear editing on the computer.
The contents of the SD Memory Card will
appear as a removable disk icon within My
Computer or the desktop on the computer
screen. (Page 109)
(Example) Windows
Removable disk (E:)
(Example) Macintosh
NO NAME
•
When copying files from the camera to a
computer, be careful to ensure that files are
not accidentally overwritten.
•
For more details, please refer to your
computer editing software's operating
instructions.
•
When changing cards, always ensure that
the access lamp is not flashing and that the
card is not currently being accessed.
•
Operations cannot be performed on the
camera while in PC mode.
•
Always perform "safe hardware removal"
when disconnecting the cable.
•
The data on the SD Memory Card cannot be
accessed when the SD Memory Card slot
cover is open.
5
Turn the camera's power off.
•
If the camera cannot be correctly recognized
by the computer, this may be able to be
remedied by one of the following methods.
�
Turn the power of the camera and the
computer off and back on again.
�
Remove the SD Memory Card from the
camera and reinsert it.
�
Connect to a different USB terminal on the
computer.
•
Hold down the mode button after
disconnecting the USB connection cable to
switch back to PB mode.
75