Table of Contents
Advertisement
Using the LCD
1
Set the POWER switch to ON.
(Page 22)
2
Hold down the OPEN button and open the
LCD monitor.
•
It can open out to 120°. Do not try to open it
further as this will damage the camera.
OPEN button
3
Position the LCD monitor where it is easiest
to see.
•
The monitor can be rotated 180° toward the
lens and 90° toward you.
•
Do not apply unnecessary force to the
open LCD. This can damage the camera.
•
Ensure the LCD is fully closed.
•
Operation status displays during self-portrait
recording
No display: Cannot record (no card, etc.)
: Recording in progress, during transition
to the recording pause mode
: Recording paused (recording standby)
: Warning display
Emphasizing outlines
Emphasizing the outlines of the images you see
in the viewfinder or on the LCD makes it easier to
focus.
Emphasizing the outlines does not effect the
images you shoot.
1
In CAM mode, press EVF DTL button.
"EVF DTL ON" appears on the screen for about
2 seconds.
BARS
CH1 SELECT
INT(L)
INPUT1
INPUT2
COUNTER
LCD
EVF DTL button
Press EVF DTL button again to return to the
original display. "EVF DTL OFF" appears on the
screen for about 2 seconds.
SHUTTER
SPEED SELECT
CH2 SELECT
INPUT 1
INPUT 2
INT(R)
ON
ON
INPUT2
OFF
OFF
MIC POWER +48V
AUDIO
ZEBRA
OIS
RESET/TC SET
EVF DTL
WFM
25
Advertisement
Table of Contents
